Computer-tech-link CTL 5fln Uživatelský manuál Strana 9

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 10
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 8
VGA 720 400 31.5 70 Non-interlaced
VGA 640 480 31.5 60 Non-interlaced
VESA 46K 800 600 46.9 75 Non-interlaced
VESA 800 600@85Hz 800 600 53.7 85 Non-interlaced
VESA 60K 1024 768 60.0 75 Non-interlaced
VESA 1024 768@85Hz 1024 768 68.7 85 Non-interlaced
Mode H.Freq (KHz) V.Freq(Hz) Remark
10
SPECIFICATIONS
Picture Tube Type : 15-inch, Flat Square Tube type
(14-inch, viewing area)
Dot Pitch : 0.28mm, MPR II
Face Treatment : Non-glare / Anti-static
Video Input Signal : R.G.B. Analog
Amp. Bandwidth : 85 MHz
Input Sync : TTL, separate negative / positive
Scan Frequency Horizontal : 30 - 69 KHz
Vertical : 50 - 120 Hz
Max. Resolution 1280 dots
1024 lines (at 60 Hz)
Power Source Free Voltage (100-240 Vac, 50/60 Hz)
Display Area Standard Display Area : 264mm(H) 198mm(V)
Full Screen Size : 284mm(H) 212mm(V)
Power Consumption Max. 80W
Regulatory Approvals
State Recovery Time Power LED
On None Green
Stand-by Green:0.5 second
Suspend Amber:0.5 second
3seconds
Sleep - Amber
Off - Off
Safety : UL, CSA, DHHS
EMI : FCC-B
11
Tilt/Swivel Range Tilt : 5 forward, 10 backward
Swivel : 45 leftward, rightward
Dimension 368(W) 394(D) 382(H) mm
(set with stand)
Weight(net/gross) 12.5 / 14.2 Kg
27.6 / 31.4 lbs
Operating Environment
Temperature : 10 40 50 104
Relative Humidity : 8 80%
Storage Environment
Temperature : -20 45 -4 113
Relative Humidity : 5 90%
FACTORY PRESET TIMINGS
Resolution
(dots lines)
This monitor has stored above-mentioned six timings in factory. You can save up
to 8 modes in the user memory automatically. Please note that if you save to user
memory over eight times, the first mode saved will be replaced with your ninth
mode.
Zobrazit stránku 8
1 2 3 4 5 6 7 8 9 10

Komentáře k této Příručce

Žádné komentáře